|
|
|
Metal Shell PBOF
- 316 stainless steel bodies with naval bronze engaging nut (MSS-).
- Optional material is 6061-T6 hard anodized aluminum (MSA-).
- Bulkhead connectors available as a threaded or flanged version.
- Cable connector plugs available in straight or right-angled configuration. (straight only for aluminum).
- Both bulkhead and cable connectors use a removable glass reinforced epoxy insert. The cable connector plug insert
(CIP) has a valve molded into the glass reinforced epoxy.
- Tube size on cable connectors must be specified at time of order (see specs).
- Up to 7500 PSI pressure rating in mated condition with back-potted bulkhead connector.
- Bulkhead connectors open face pressure rated to 5,000 PSI.
- Contacts gold plated per MIL-G-45204.
- All mounting surfaces require a 32 finish.
- Do not over tighten bulkhead connectors when mounting.
- Care must be taken not to damage contacts in unmated connectors.
- Lubricate O-rings with Dow Corning #111 Valve Lubricant or equivalent.
- Keep O-ring grooves clean and avoid cuts and nicks in the O-ring. Replace O-rings when re-mounting connectors.
- Avoid contact with solvents.
|
| Connector |
|
|
Metal Shell PBOF |
|
|
|
|
|