Teledyne Proudly Powers NASA's
          Curiosity Rover


Teledyne Acquires PDM Neptec

Teledyne Impulse
Brochure

Products
Breakouts
Rubber Molded/Glass Reinforced Epoxy
Inverted Rubber Molded/Glass Reinforced Epoxy
Glass Reinforced Epoxy
Metal Shell
Metal Shell PBOF
Penetrators
Wet Pluggable
Micro Wet Pluggable
IE55 Rubber Molded/Metal Shell
IE55V Inverted Rubber Molded/Metal Shell
IE Underwater Pluggable
IE55 Subminiature
Magnetically Operated Proximity Switches
Miniature High Density
Miniature High Density - Oil Filled
Metal Key Titan® Series

News
Worldwide
Glossary
Downloads
About Us
Contact Us

Terms and Conditions

Metal Shell
  • 316 stainless steel bodies with naval bronze engaging nut (MSS-).
  • Optional material is 6061-T6 hard anodized aluminum (MSA-).
  • Bulkhead connectors available as a threaded or flanged version.
  • Both bulkhead and cable connectors use a removable glass reinforced epoxy insert (not available with MSSJ / MSAJ).
  • Cable connector plugs and receptacles can be overmolded using neoprene or polyurethane. The conductor insulation and jacket material of specified cable determines overmold material.
  • Cable connector plugs and receptacles are supplied unterminated unless cable termination is specified at time of order.
  • Special MSSJ/ MSAJ cable connector plug available for use with oil filled tubes.
  • Up to 20,000 PSI pressure rating in mated condition. See specs for individual connector ratings.
  • Bulkhead connectors open face pressure rated to 5,000 PSI.
  • Contacts gold plated per MIL-G-45204.

  • All mounting surfaces require a 32 finish.
  • Do not over tighten bulkhead connectors when mounting.
  • Care must be taken not to damage contacts in unmated connectors.
  • Contact surfaces must be dry prior to mating.
  • Lubricate O-rings with Dow Corning #111 Valve Lubricant or equivalent.
  • Keep O-ring grooves clean and avoid cuts and nicks in the O-ring. Replace O-rings when re-mounting connectors.
  • Avoid contact with solvents.
  • Avoid sharp bends at cable entry to connector.
  • Elastomers can be seriously degraded if exposed to direct sunlight or high ozone levels for extended periods of time.
Connector # of Contacts Voltage Rating Bulkhead Thread Mated Pressure Rating (PSI)
PDF Get Acrobat Reader
MSSJ/ MSAJ 2,3
4,5,7,9,10,14,16
600
300
9/16"-18 10,000 pdflogo pdflogo
MSSG/MSAG 2,3,4
6,7
600
300
3/4"-16 20,000 pdflogo
MSSK/MSAK

3,4,6,7,9,10,12,16

600
1"-14 20,000 pdflogo
MSSL/MSAL 1,2,3,4,6
4HV
8,12,13,15,16,18,20,
22,25,26,30
1000
3000
600
1 1/4"-12 20,000 pdflogo
MSSM/MSAM 2,4
2HV,4HV
8,16,18,20,22,24,30,37,42
1500
3000
600
1 3/4"-12 20,000 pdflogo
MSSO/MSAO 3,48 600 2 1/4"-12 20,000 pdflogo
MSSQ/MSAQ 35HV, 36HV,
55, 60, 96
2000
600
2 3/4"-12 20,000 pdflogo

Assembly

pdflogo  Top